10 Best Wire Stripping Machine for Strip Copper and Scrap Wire

10 Best Wire Stripping Machine for Strip Copper and Scrap Wire

Want to shred your workload or enjoy relief from stripping wires with hand-operated tools? Purchase this innovative wonder that will reduce your labor and leave you with zero fatigue. It’s no other than an automatic wire stripping machine.

The electrical sector has reached a new level of advancement. Numerous machines have aided these advancements, including wire stripping machines.

A decent copper wire stripping machine is a priceless piece of equipment. It will enable you to perform tasks such as converting a coax cable to plain copper without effort.

You might wonder, “I can do that with any manual.”  Sure, but it’ll take a long time and consume much of your energy. Furthermore, if you do not even realize what you will get? Merely stripping wire with a knife might be disastrous!

Cable stripping machines allow you to save time while also ensuring your safety. Furthermore, they create copper of far top standards.

However, not every wire stripper is created equal. So how can you know which ones are excellent and which are poor?

Continue reading to learn about our evaluations of various best wire stripping machines in the market and our in-depth customer advice on each.

Our Picks for the Best Wire Stripping Machine

1. Best Overall:  StripMeister Automatic Wire Stripping Machine

StripMeister Automatic Wire Stripping Machine

Dimensions: 6 × 4.25 × 8 inches

Weight: 5 lbs

Wire Range: 18 to 250 MCM with Φ 2mm – Φ 20.1mm

Rating: 4.7 out of 5.0

The StripMeister Automated Cable SiciWire Stripping Machine is the most professional cable stripping equipment available. This automated wire stripper would save you a lot of time by quickly getting to the copper.

With the capacity to strip a range of cables ranging from 18 to 250 MCM (including stranded wires and ROMAX), this wire stripper machine is an ideal resource that enables you to better final results while allowing you to use it indefinitely.

If you don’t have much extra time to devote to wire stripping, the built-in Romex slot on this tool will save you an additional 33% peeling duration. In addition, its weatherproof and durable construction provides your comfort for a long time, regardless of the weather patterns you operate in.

As a result, with just this power drill on hand, you didn’t have to endure any additional effort to complete all of your cable stripping jobs.

This is the one to go with if you’re looking for the right powered wire stripper that makes stripping easy. This automatic wire stripping machine is ideal for professionals, but it’s also simple to be used by an ordinary person.

Pros

  • It saves time.
  • Durable strips.
  • Wide gauge range of wires
  • It is not necessary to purchase an additional motor
  • Including all cables, it works flawlessly
  • Top-rated wire stripping machine

Cons

  • Once every 2 feet, the conveyor hole must be relined with wire.

2. Best Heavy-duty: CREWORKS Automatic Wire Stripping Machine

CREWORKS Automatic Wire Stripping Machine

Dimensions: 9.4 × 12.6 × 12.6 inches

Weight: 25.8 lbs

Stripping Speed: 49 ft./min

Warranty: 1 year

Rating: 4.6 out of 5.0

This automated wire stripper machine is a terrific alternative thanks to its universal feed hole, powerful motor, sturdy aluminium framework, and robust blades. In addition, the wire stripper is lightweight, durable, and adaptable, owing to the solid aluminium frame. This copper wire stripping machine can also be used for bulky wire peeling and performs the task correctly every time.

Including the busiest operations, the solid 180W motor operates without hiccups. Besides, if you need to strip multiple varieties of cables for copper recovery, there’s a universal input tube that will save you the time and annoyance of using other devices.

Overall, it’s the machine’s ease of use that stands out. You just have to turn the stripping machine on, which will take care of everything else. There is an easy method to tune the blade. All you have to do now is spin the upper screw nut, and you’re ready to go.

This stripping wire machine is a steal compared to other automated wire stripping devices, particularly regarding durability. However, it’s also suitable for both professionals and beginners due to its ease of usage.

Pros

  • Frame made of solid aluminium alloy
  • It’s compact and portable.
  • A powerful motor
  • Long-lasting blades
  • Fully automated and simple to use
  • It works with a variety of wire diameters.
  • Screw-nut that can be adjusted
  • Economical

Cons

  • After a lengthy period of usage, the machine produces heat
  • A little bit of heavy

3. Industrial Option: SST Industrial Wire Stripper Machine for Cable Removing

SST Industrial Wire Stripper Machine for Cable Removing

Dimensions: 8.39 × 6.46 × 5.83 inches

Weight: 3.89 lbs

Wire Range: 18 gauge to 300 MCM

Warranty: 3 years

Rating: 4.4 out of 5.0

The automated copper wire stripping machine is durable steel wire stripping equipment built to last. The finest feature of this stripper is its strong and sharp tungsten teeth, which easily cut through the wire. Both the machine and blades can last a lifetime.

This wire stripper machine features a wire matrix that can be adjusted to work with various wires, with Romex included. You may even use it for large cables (300 MCM) without worrying about replacing the blades. Moreover, the solid blades and strategically positioned feeding holes ensure a clean cut constantly.

You’ll need a drill or motor to operate this cable stripper machine. Fortunately, there isn’t much setup time, so once you connect a power source, you won’t have to fiddle with any of it.

The commercial line stripping machine is ideal for users that need to cut a large quantity of wire yet are on a limited budget. It’s an excellent alternative to bulky and difficult-to-transport copper wire strippers.

Pros

  • Compact and simple to operate
  • A motor or a drill can handle it.
  • Various wire widths are fed through feeding holes.
  • Durable metal CNC carved design
  • Blades made of tungsten
  • A sturdy framework
  • Economical
  • 3-year warranty

Cons

  • An outside power source is required.

4. Best for Durability: Happybuy Electric Automatic Electric Wire Stripping for Scrap Copper

Happybuy Electric Automatic Electric Wire Stripping for Scrap Copper

Dimensions: 8.5 × 12.5 × 12 inches

Stripping Speed: 60 ft/min

Wire Range: Φ1.5mm – Φ25mm

Motor: Induction motor

Rating: 4.4 out of 5.0

This wire stripping machine features a separate measuring mechanism that accommodates any wire or cable size. As a result, you may trash tiny wires and cables made of plastic, rubber, and other things that are typically tough to work with while stripping wire using this wire stripper equipment.

Moreover, this stripping wire machine includes an additional gearbox for stripping all sorts of wires at a faster pace. It can also strip cables up to 1.5 inches thick thanks to its massive and robust 370 W motor.

The wire stripper also features ten blades and 11 feeding apertures for stripping cables of various sorts and sizes. The interesting part is the absence of a power source, but an adaptable backup manual spin is available.

In addition, the copper stripping machine is suitable for stripping big amounts of wire of various sizes with various insulating materials. It’s practical, durable, and can last longer. Overall, this high-quality wire stripping machine is highly recommended.

What is in the Package

One portable electric wire stripping machine, one instruction manual, and one feeding panel.

Pros

  • 10 blades and 11 channels
  • Wire stripping gearbox designed for speed
  • It’s great for stripping fine and tough wires.
  • Compatibility with a diverse variety of wire sizes
  • Backup by hand crank
  • Blade replacements are inexpensive.
  • Strips wire at a rate of 50-60 feet per minute.

Cons

  • Not found

5. Best for Large Wires: Drill Operated Copper Wire Stripping Machine

Drill Operated Copper Wire Stripping Machine

Dimensions: 7.9 × 1.97 × 1.97 inches

Weight: 2.9 lbs

Wire Range: Φ 3 mm – Φ20 mm

Rating: 4.4 out of 5.0

ONLY FOR LIGHT USE!!! LFaize stripping machine is a pure heavy-duty cable stripper with a  stripping range of 0.12′′ (3mm) to 0.78′′ (20mm) in diameter. This wire stripping machine can only be used on large wires. Smaller wires can’t be removed with the equipment, such as those in stoves, dishwashers, refrigerators, and washing machines!!!

Nowadays, an additional offer is available on its purchase, and that is the machine is available with an extra blade.

Besides, as the wire stripper works with heavy-duty cables, blade blindness may arise. Therefore, the gifted extra blade allows easy adjustment in the machine to save you from any fatigue during your project.

LFaize copper wire stripper has a fantastic aluminium design that gives you the durability and robustness to work with hard-core cables.

In addition, you cannot use the wire stripping machine to strip telecommunication cables, which is designed to remove wires with rubber and plastic insulating layers instead.

With a large stripping range and compact design, this machine weighs only 2.9 pounds and is a cheap and easy product for those who want extra cash. It takes less than 10 minutes to install and replace the blade. No extra skill is required to operate the wire stripping machine.

Pros

  • Economical
  • Light-weight and compact design
  • Portable
  • Easy installation
  • Comes with an additional blade
  • Hard-core aluminium design

Cons

  • Only be used on large wires.
  • Cannot strip telecommunication cables.
  • Pulling cable on a regular setting is required.

6. Premium Pick: BLUEROCK Model MWS-808PMO Wire Stripping Machine

BLUEROCK Model MWS-808PMO Wire Stripping Machine

Dimensions: 22.5 × 13 × 17

Weight: 125 lbs

Wire Range: 18 AWG – 1” OD (Φ 2 mm – Φ25 mm)

Stripping Speed: 75 ft/min

Rating: 4.6 out of 5.0

Wire stripping machines made by Bluerock are the best on the market. Among Bluerock wire stripper machines, this equipment stands out. Experts vouch for this cable stripping equipment’s advantages, particularly the potential to self-adjust to various wire sizes. In addition, this copper cable stripper can adjust fast to any wire or size, sparing you a lot of time compared to other copper wire stripping machines.

With this top electric wire stripping machine, you can cut two wires at once. It will also save you time and energy when stripping cables.

Moreover, this stripping machine’s blades are razor-sharp and can endure long. You can extend the life of the wire stripping machine’s blade by increasing the blade tension. Do not worry about purchasing numerous blades, as you won’t need those.

You can count on this automatic wire stripping machine for a long time because of its multi-purpose settings, high quality, and cutting-edge technology. It’s simple to use, whether you’re a techie or not, and learning to operate is a piece of cake.

It is, without a doubt, the finest automatic wire stripper on the market. The machine’s sole drawback is its cost, but with all the copper cable you’ll be stripping, it’ll easily pay for itself.

Pros

  • Automatically adjusts to various wire diameters
  • Long-lasting blades
  • Allows you to sever two cables simultaneously.
  • Efficient
  • A strong motor
  • 9 cutting channels

Cons

  • Expensive

7. Best Value: PENSON & CO. Automatic Powered Electric Wire Stripping Machine

PENSON & CO. Automatic Powered Electric Wire Stripping Machine

Dimensions: 34 × 38 × 39 inches

Weight: 31.3 lbs

Wire Range: 14 gauge to 1-1/4”

Stripping Speed: About 60 ft/min

Rating: 4.6 out of 5.0

With this wire stripping machine, you can remove the rubber and plastic coating from intact scrap wires with diameters ranging from 0.12″ to 1″.

It is widely applicable to the processing of automotive wiring harnesses, aircraft wires, data and audio lines, wire recycling disassembly, and other industries.

The wire stripper for scrap copper and wire can be easily attached to a table, bench or workstation. You can adjust the spacing between the shaft and the blades depending on the cable size.

The motor of this wire stripping machine can save effort and time compared to other automatic wire stripping machines. It can strip at a rate of about 60 ft per minute. Isn’t it true that saving time and energy is a good thing?

Made of a special high-strength metal, the copper wire stripping machine delivers excellent slicing work and effortless cutting of the wire’s protective sheath.

What is in the Package

One automatic powered wire stripper machine, one Allen wrench, one feeding panel, one reducer vent knob, and one user manual.

Pros

  • High-strength metal framework.
  • Hand-operated dismantling
  • Strip at a rate of 60ft per min
  • Effortless cutting
  • Easy to attach to a workstation

Cons

  • High-speed steel has a substantially shorter service life.

8. Best Upgraded Version: BEAMNOVA Manual Wire Stripping Machine

BEAMNOVA Manual Wire Stripping Machine

Dimensions: 11.02 × 9.06 × 5.12 inches

Weight: 6 lbs

Wire Range: Φ 2 mm – Φ25 mm

Type: Manual

Rating: 4.6 out of 5.0

This manual wire stripping machine is a smart Model with Configurable blades for wide compatibility! The hand wire stripper’s tunable rollers and blades accommodate wires with diameters ranging from 0.08″ (2mm) to 0.984″(25mm).

In addition, the design reduces the amount of time spent on recycling. When trimming 20-25 mm cables, the front panel may need to be removed.

The seamless moving hand crank with a sharp metal blade peels at a quick 50 ft. per minute. Its safety is ensured by single-phase induction.

The BEAMNOVA manual wire stripper machine is made of solid aluminium alloy and can resist harsh situations and years of use. Besides, special alloy blades survive substantially more than high-speed steel blades.

The BEAMNOVA cable stripper can extract rubber and plastic insulation from scrap wire that has not been degraded, making it a highly recommended option for copper wire recovery!

Overall, the stripping wire machine is compact, handy, and portable and can be used in conjunction with a motor or electric drill. Three simple mounting options are bolting to the bench, clamping on a bench corner, and holding in place by the vise.

Pros

  • Adjustable blades for wide compatibility
  • Fast stripping speed
  • Durable
  • Recycling copper wire
  • Portable & convenient

Cons

  • Manual
  • No built-in electrical source

9. Best for Copper Wire Recycling: Automatic Electric Wire Stripper Machine

Automatic Electric Wire Stripper Machine

Dimensions: 14.17 × 12.2 × 14.57 inches

Weight: 30 lbs

Wire Range: Φ 1.5 mm – Φ25 mm

Stripping Speed: About 60 ft/min

Rating: 4.3 out of 5.0

This wire stripping machine is made of aerospace-grade solid aluminium alloy that can survive harsh situations and last for years. The 180W motor delivers enough power while conserving electricity. Removing the rubber and plastic insulation from intact junk wire has never been easier.

The CO-Z cable stripping tool makes your task much easier if you recover copper wire for automobile wiring harness preparation, aviation cable preparation, wire recycling disassembly, audio data line processing, or other industries.

The automatic wire stripping machine comes with sharp blades with a 60-foot-per-minute stripping speed. The majority of wires can be fed through various-sized feed holes.

The drill-driven and hand crank technology

 makes the stripping machine more simple to use. In addition, the rapid stop button is shielded by a plastic cover to save power.

What is in the Package

One portable powered wire stripping machine, one feeding panel, and one instruction manual.

Pros

  • Best for old electrical wire stripping
  • Comes with a built-in motor of 180 W
  • Work on a variety of wire diameters ( 0.06” to 1”)
  • Lightweight, portable and robust

Cons

  • Little pricy than others in the market.
  • Get heated when used for a long period.

10. Best Manual Machine: CopperMine Manual Copper Wire Stripping Machine for Recycling Scrap Copper

CopperMine Manual Copper Wire Stripping Machine for Recycling Scrap Copper

Dimensions: 8 × 2.25 × 11.75 inches

Weight: 5.6 lbs

Wire Range: 24 AMG-250 KCM (stranded or solid)

Rating: 4.2 out of 5.0

If you inquire someone about the most crucial aspect of any instrument, they will tell you that it must be both easy and efficient. This is particularly true for any wire stripper that allows you to do the task as swiftly and smoothly as possible while remaining remarkably efficient.

The CopperMine manual wire stripping machine is a simple, convenient, and reliable wire cleaner. This wire stripper is intended for fine wire with tightly coiled insulation and will work nicely for cables ranging from 24 AWG to 7/8″.

This wire stripping machine can significantly reduce the complexity of wire stripping while being an excellent choice for beginners.

How the Manual Wire Stripping Machine Works

The wire is pre-aligned and flattened before reaching the blade, resulting in perfect slices thanks to the output restriction and input guide.

The EZ Start Cutter allows you to swiftly and easily remove the copper wire while producing a precise insulation cut that cleans the inner wire.

This stripping machine also comes with a three-way mounting bracket that allows it to be mounted in the most suitable area for the operator. This wire stripper enables you to strip wires quickly and effectively.

Pros

  • Fine wires are easily accommodated.
  • Movable nuts for blade and guide rails adjustment
  • Movable nuts for blade and guide rails adjustment
  • Portable
  • Simple to use
  • Copper wire is cut neatly

Cons

  • Blade replacements are difficult to find in the market.
  • Manual operation is complex, and there is no hand crank.

How to Choose the Best Wire Stripping Machine

Now that we’ve given you a detailed description of the best wire stripping machines in the market, you might be wondering which one is best suited for your personal/professional needs.

So to help you out, here are some points you should consider before purchasing a wire stripper machine:

Complexity

The first question you must ask yourself is this: how much practice do you have with these stripper machines? Of course, a newbie will like to keep things simple: a manual machine with a few channels will do. However, someone with loads of experience might prefer something more complex.

Overall, you should select a machine that offers more versatility and is easy enough for you to use best.

Automation

Generally, automated tools help save time and require less effort, especially when you’re working on a small scale or need more production in a limited time.

However, when it comes to automatic wire stripping machines, they can only handle a limited size of cables.

So, a manual wire stripping machine is best for you if you want to handle many different types of wires.

Versatility

Among manual wire strippers, some types offer more versatility than others. You can decide what sort of machine you need based on your ongoing projects and upcoming plans.

For instance, in certain wire strippers, you can conveniently adjust the blade tension, while some models are not that flexible.

But, with the versatility, you’ll need to compromise on time. As we mentioned, a manual wire stripping machine can churn out much more volume at a time than an automatic one, but if you’re willing to sacrifice that for comfort, that’s your choice.

Hybrid Option

Alternatively, you can settle for a wire stripper machine offering automatic and manual services. These models provide a hand crack that allows you to adjust the speed. However, these models might be more expensive, so you’ll need to consider whether you require a hybrid wire stripper for your current and future projects.

Multiple Channels

Most copper wire stripping machines offer a single wire size option. But in some cases, you might need a few more choices. That’s why we suggest you consider buying a wire stripping machine with multiple channels that allows you to insert various wire sizes and increase your versatility.

Modifiable Blades

We believe choosing a wire stripper machine with adjustable blades is a better option.

This will allow your automatic stripper machine to handle wires of varying thickness and insulation at greater speeds and efficiency. In manual stripping machines, you’ll need to make these adjustments yourself.

Also, try getting a wire stripping machine that allows you to replace the blades. This ensures a superior output every time and can eventually enhance your stripping machine’s lifetime.

Portability

For wire stripping machines, some prefer lightweight options (manual models are almost always lighter) because of the convenience of moving the machine around. However, some users might like to fix the device in one place. If so, then choose a heavier model.

In certain cases, the decision may depend on the features you require. For instance, larger wire stripping machines generally offer more functionality than smaller models. But these will come with compromised portability, so you’ll need to figure out what is more important for you carefully.

Final Thoughts

Although these are our choices for the best wire stripping machines, the ultimate decision lies with you. However, we hope this in-depth review and guide will help you learn everything you need about wire stripping machines to make an educated and worthwhile choice.

Leave a Reply

Your email address will not be published.