7 Best Wheelie Bars for Dirt Bike Wheelie Trainers

featured-wheelie-bar-2

Wheelie Bars or “brake” bars are devices that are attached to the rear axles of motorcycles and other motor vehicles to prevent the back end from rising during heavy braking or accelerating. Minibike Wheelie Bars are used to limit reverse wheel travel and allow forward wheel travel without tilting. Dirt bike Wheelie Bars also help eliminate forward tipping that may occur due to various racing and lifting operations. Because of all these features, Wheelie Bars have become popular in most industries, such as mining, oil & gas, construction, lumber, trucking, and even the gaming and racing industry.

When you’re looking to buy Wheelie Bars online, you must first understand what they are and why they’re so important. There are a lot of different Wheelie Bars out there, which can make it challenging to find reliable information. This guide will take the guesswork out of buying Wheelie Bars.

In this article,

Our Picks for The Best Wheelie Bar

What is a Wheelie Bar?

What does a wheelie bar do?

How long should wheelie bars be?

What to look for when buying wheelie bars?

Our Picks for The Best Wheelie Bar

Best Overall Wheelie Bar: Traxxas 3678 Wheelie Bar

Best Value For Money Wheelie Bar: ARRMA AR320366 Wheelie Bar

Most Easy-to-Use Wheelie Bar: Traxxas 3678X Blue Wheelie Bar

Best Budget Wheelie Bar: Traxxas 5472 Wheelie Bar

Best Light-weighted Wheelie Bar: Traxxas 3678A Wheelie Bar

Best Versatile Wheelie Bar: ARRMA Wheelie Bar Set ARAC6487

Best Stability Wheelie Bar: OGRC Aluminium Adjustable Wheelie Bar Kit Tail Wheel

Best Overall Wheelie Bar: Traxxas 3678 Wheelie Bar Assembly

Weight: 2.96 ounces (0.084 kg)

Size: 9.25 x 6 x 1.25 inches

Material: Nylon

Color: Black

Rating: 4.7 out of 5.0

The Traxxas 3678 Wheelie Bar Assembly is a Wheelie Bar for the Traxxas Rustler, and it will help you keep your bike upright when you’re performing a wheelie. The 3678 Wheelie Bar is adjustable and can fit into four different heights depending on preference. It’s made of nylon composite for performance, with a black color finish.

Pros

  • Easily controllable
  • Easy to mount and install
  • Easily adjustable to different heights
  • Sturdy and stable when properly installed

Cons

  • It can easily unclip after a massive impact.

Best Value For Money Wheelie Bar: ARRMA AR320366 Wheelie Bar Set Outcast

Weight: 2.39 ounces (0.068 kg)

Size: 5 x 4 x 1.64 inches

Material: Plastic

Color: Black

Rating: 4.6 out of 5.0

This is it if you’re looking for the best Wheelie Bars for bikes on a budget. The ARRMA AR320366 Wheelie Bar Set Outcast is an affordable option that will not make your wallet bleed. Coming in at under thirty dollars, these Wheelie Bars are a great way to take your riding experience up a notch without breaking the bank. Plus, they come in standard black, so it blends with everything!

The most significant benefit of this set of bars is their durability and reliability compared to other market options. Using high-quality material such as carbon fiber reinforced plastic (CFRP), these bars can withstand heavy use without cracking or bending, as some competitors do after just one ride! This makes them perfect for those who want something that works well but doesn’t need replacing every few months, as some models do.

Pros

  • Material is quite tough and very durable
  • Fit in a wide range of vehicles
  • Aesthetics looks
  • Very firm fitting on supported vehicles

Cons

  • Wheelie Bar is relatively short

Most Easy-to-Use Wheelie Bar: Traxxas 3678X Blue Wheelie Bar, Assembled

Weight: 2.96 ounces (0.084 kg)

Size: 12 x 12 x 5 inches

Material: Nylon, Aluminum

Color: Blue

Rating: 4.6 out of 5.0

Some Wheelie Bars can be too thin and break easily, while others poorly absorb impact when you land on a wheelie. The Traxxas 3678X Blue Wheelie Bar is made from high-grade 6061 aluminum alloy that has been hard anodized for maximum protection against rust and corrosion.

The blue color is sure to turn heads on the race track, but it also helps protect against glare while riding at night—so you won’t have trouble seeing obstacles ahead of time! This Wheelie Bar fits Traxxas Slash 2WD vehicles with front axles attached using hex screws (5x15mm). It will also fit models with 4WD transmissions such as the Traxxas Slash 4×4 VXL, Slash 4×4 Ultimate, or simply called “Slash” if you want something more straightforward but still fun for beginners.”

Pros

  • Easy to Install and adjustable
  • Excellent protection for the rear of the car
  • Very durable and can be put back in shape after a clumsy hit

Cons

  • Screw strips very easily

Best Budget Wheelie Bar: Traxxas 5472 Wheelie Bar

Weight: 3.27 ounces (0.09 kg)

Size: 7.5 x 2.75 x 5.75 inches

Material: Aluminum

Color: Black

Rating: 4.6 out of 5.0

The Traxxas 5472 Wheelie Bar is a CNC machined aluminum Wheelie Bar that is made to fit 1/10 scale vehicles. The bar attaches to your tires using three #4 screws that are included with the kit; these screws are threaded into slotted holes on each end of the Wheelie Bar. Amazingly, this Wheelie Bar has the most effortless removal process on this list.

Pros

  • Quite versatile; fits all Revo, nitro, and electric machines
  • One snap install and detach function
  • Adjustable to a height of preference
  • Durable and long-lasting

Cons

  • The plastic wheel makes it unfit for massive landing.

Best Light-weighted Wheelie Bar: Traxxas 3678A Wheelie Bar

Weight: 1.76 ounces (0.05kg)

Size: 8.5 x 0.88 x 2 inches

Material: Nylon, Aluminum, Rubber

Color: Green

Rating: 4.6 out of 5.0

The Traxxas 3678A Wheelie Bar is a Wheelie Bar that includes everything you need to install it onto your bike. It’s made from aluminum and has been designed for use with the Traxxas Bandit XL-5. The package comes with four hex screws, four flat head screws, one axle mount w/Hex, two axle mounts, and one Wheelie Bar assembly. This product can be shipped within 24 hours of ordering in most cases.

The uniquely designed, light-weighted bar has four adjustable positions and can be easily installed and removed for off-road adventures. Construction of the design is designed to provide extra protection for the transmission and motor case.

Pros

  • Light-weighted and very stable at the same time
  • Easy to install
  • Adds beautification to vehicle

Cons

  • Pops off more frequently

Best Versatile Wheelie Bar: ARRMA Wheelie Bar Set, ARAC6487

Weight: 2.08 ounces (0.06 kg)

Size: 4.8 x 4 x 1.17 inches

Material: Plastic

Color: Black

Rating: 4.6 out of 5.0

This is a set of plastic Wheelie Bars for your vehicle. They are designed to stop you from flipping over when you do a wheelie with the rigid plastic composite material. These can be mounted to either side of the rear axle and will fit most vehicles from 1/10 scale up.

Pros

  • Additional height setting to adjust the angle of the wheelie
  • Strong plastic composite
  • Plug and use; no extra mods required
  • Not expensive for all it can offer

Cons

  • A bit light and tacky

Best Stability Wheelie Bar: OGRC Aluminium Adjustable Wheelie Bar Kit Tail Wheel

Weight: 3.53 ounces (0.1 kg)

Size: 9.13 x 4.96 x 0.55 inches

Material: Aluminium, Rubber

Color: Black

Rating: 4.5 out of 5

The OGRC Aluminium Adjustable abs Wheelie Bar Kit Tail Wheel is a Wheelie Bar that is adjustable, lightweight, easy to install and can be used on most bikes. This Wheelie Bar is suitable for beginners and advanced riders alike because it is adjustable to fit a wide range of heights and sizes.

This mini bike Wheelie Bar kit includes all the necessary parts required to install it on your motorcycle or ATV with little to no modification. The main frame uses high-quality aluminium materials, so you don’t have to worry about rust or corrosion setting in over time like with steel bars.

Pros

  • Speed and performance is top notch
  • Allows turning at adjustable angles

Cons

  • Not fit for off-road use
  • Assembly might be a bit of work

What Is A Wheelie Bar?

A Wheelie Bar is a device attached to the ATV’s front suspension, helping you control your vehicle while performing wheelies. Wheelie Bars can be made from many different materials, including steel, aluminium, and chrome. They are usually adjustable in length and width so that they can accommodate different types of vehicles. You can also buy them in kits or individual parts.

Wheelie Bars are available for both 2-wheel drive and 4-wheel drive ATVs. If you have a 2-wheel drive model, the Wheelie Bar will be mounted on the right side of your vehicle. If you have a 4-wheel drive model, then it will be mounted on both sides of your vehicle.

What Does A Wheelie Bar Do?

A Wheelie Bar helps you keep your bike under control when it’s in the air. It also helps you stay on the bike and get it back on its wheels without flipping over if you end up going into a wheelie flip-over situation. The best Wheelie Bars for mini bikes are those that have enough leverage and length to allow for maximum leverage at lower speeds.

How Long Should Wheelie Bars Be?

Wheelie Bars should be long enough to keep the bike’s front end off the ground and short enough to allow the rider to turn it effectively. Most Wheelie Bars are adjustable in length, so you can choose a size that works for your riding style.

If you’re new to riding, go for a more extended bar for more stability and control. If you know exactly what you’re doing and don’t need as much help balancing out, then maybe one with less length will work better for you!

What to Look for When Buying Wheelie Bars

There are several Wheelie Bars to choose from. Some are made of aluminum, and some are made of steel. The most important thing to look for when choosing a Wheelie Bar is the material it’s made from because this will determine how long your bar will last before you need to replace it.

There are also many different styles of bars, but you should choose one that comes with all the parts needed for installation on your bike so that you won’t have any trouble getting it mounted on your mini bike. Before you buy a mini bike Wheelie Bar, keep the following in mind:

  • Adjustability: If you can adjust the length of your Wheelie Bar, that is a good thing. It’s not always necessary to have a long one; sometimes, it’s better to have something adjustable to fit your height, style, and bike size.
  • Material: Look for aluminum rather than plastic ones—they tend to be stronger and lighter than plastic bars, making them more comfortable for riding over long distances with an added weight on top of what you already have on your bike. However, if the speed is what you want, consider the ones with plastic or nylon material.
  • Rubber grips: These are essential for keeping control over your bike when lifting up its front end during stunts such as burnouts or skids (or if you just want extra stability while riding!). They also help prevent injuries if they do slip off while doing tricks: rubber grip handles are less likely than metal ones because they flex instead of breaking off entirely when too much torque is applied to them at once (which could cause serious injury).
  • Quick release mechanism: This should come standard with any good quality Wheelie Bar; if yours doesn’t have one yet, look elsewhere until you find one with this feature!

Leave a Reply

Your email address will not be published.