BEST ELECTRIC NAIL GUN COLLECTION FOR YOU
Here are some well-known and popular brands like Bosch, DEWALT, Craftsman, Ridgid, Bostitch, Metabo HPT, DEKO, and PORTER-CABLE.
Step 1: First, turn off the power switch and ensure your tool is disconnected from the power supply. Turn the tool upside down and open the magazine with the magazine release lever in the back. A strip of t50 staples. Make sure the legs of the staple are facing up towards the ceiling and put the strip of staples into the magazine. If you are nailing, you will need a strip of 58-inch 18 gauge brad nails. Make sure the points of the nails are facing up towards the ceiling. Insert the nails into the magazine. You can see the rad nail indicator on the front of the tool. That's the side of the magazine the nail should rest against. Close the magazine, making sure it locks in place.
Step 2: Connect the power source. Put the nail gun vertically and make it touch the plane, depress the safety nosepiece, and pull the trigger.
Step 3: You can adjust the depth of the nail by a button close to the trigger.
Shipping Fast: Standard Shipping or Air Shipping according to your location.
24 Hours After-sales Service: Get in touch with our customer service department anytime.
The power supply engine has a spinning flywheel, which drives the motor. Press the trigger, and the flywheel starts to work, allowing for rapid bump firing.
Air Nail Gun
All air-powered nail guns have an air compressor. When the trigger is pressed, the air pressure travels through the tubes inside the machine and ends up in the barrel area to finish the job.